1) SPA Timer (optional) 2) Mains Tap Manifold with five outlets screws onto tap or timer. 3) Each outlet from the manifold can feed up to 30 Drippers, 30x5 outlets = 150 Total Drippers. To ensure an even flow of water throughout the system it is recommended that each group should be controlled by its own valve. 4) Microbore pipe should be cut to the correct lengths using sharp scissors/knife. Use wall clips every 45cm when attaching the pipe. 5) Use End-line and In-line Drippers accordingly and Mini Spikes to hold pipe in place. 6) When connecting the fitting into the Microbore pipe use hot water to warm the end of the pipe. 7) Drippers sit on top of soil surrounding plant.

 The microbore pipe connects to the water source using a Mains Tap Manifold, (this unit has 5 outlets and up to 30 Drippers can be fed from a single outlet, this is enough for 10 average hanging baskets.)  The mains tap manifold screws onto the tap or timer.  The Drippers are inserted into the run of microbore pipe (a simple snip and push in process) and are held in place by a Pipe Holder for perfect positioning.  Each set of drippers should have its own control Valve allowing water to be evenly distributed throughout the system.  You can spur off using 3-way Tee Connectors.