Impervious to light. For above and below ground installation. Can be left in place over winter. Will accept paint.

This connector allows the 3.6mm i/d Microbore pipe to spur off the 13mm i/d Polypipe, or to create extensions on existing 3.6mm i/d Microbore pipes.

If you make a hole in the wrong place in your 13mm i/d Polypipe, push in a mistake plug and the hole is sealed.

3.6mm i/d 6.3mm Ø Soft PVC available in pre-cut lengths. To attach components simply snip and push fit. Accepts paint for colour matching.

Available for both Pipes.

Used to seal the end of 13mm i/d Polypipe. Allows for quick flushing and draining down.

Keeps pipe in the desired position on or underground.

Barbed for 13mm i/d Polypipe.

For making precise holes in the 13mm i/d Polypipe.

Can be used for large Hedgerows.
Coverage:
75mm - 610mm.

For 13mm i/d Polypipe joins, tight corners & spurs. Straight, Elbow & Tee fittings are available. Gluing not required, Jubilee Clip can be used.

Fits most garden hoses & Polypipe enables positive, secure connections.

Allows secure connection of two lengths of hoses.

Fits all 12mm BSP threaded taps. Available in larger sizes on request.

Connects Mains Tap Manifold to Quick Hose Connector.

Used to connect two or three hoses together with Quick Hose Connectors.